Categories

Specials
Home  >  Snorkels  >  Accessories

Cressi Silicone Exhaust Valve

Cressi Silicone Exhaust Valve
IST
Other products by IST
SKU: CREP12
Reg. Price: $4.95
Our Price: $1.70
Quantity:
on orders of $45.00 or more.
Please review our shipping policies for details and restrictions.

Description 

Cressi Silicone Exhaust Valve

FEATURES

  • Silicone exhaust valve 
  • For the snorkels:Supernova

Reviews

Average Rating:
(based on {0} review{1})

Showing 1 Review:

RatingReviewerReview
by David Lester
on 7/13/2022
from Wautoma, WI 		Silicone drain valve for snorkel exhaust
Replacement valve works perfectly!  No more gargling and choking with every breath!
Review and Rate this Item

FAQs

Question asked
on 3/7/2019 		Does this fit any cressi regulator, I have mc9. Just want to make sure before ordering.
Answer by Bill
on 3/8/2019 		Hello, Good question, it is for a snorkel. If you need reg parts I would suggest that you let us do your annual service for the reg. Feel free to call us for more info. 1 866 728 2293 Thanks, Instructor Bill
 
Question asked
on 12/8/2019 		what diameter is the valve? I need 26mm diameter valve.
Answer by chris
on 12/13/2019 		Hi, Thanks for your question. The valve is smaller then that, it's about 3/4 of an inch in diameter. Thanks Divemaster Chris
 
Question asked
on 6/3/2021 		I have a Speedo Dive snorkel and want to replace an oval part that is attached to the mouthpiece. Is this the correct item?
Answer by chris
on 6/4/2021 		Hi, Thanks for your email. This item is a replacement for the purge valve on a snorkel. You can send us a photo of the item your trying to replace and we can tell you if this is the right part. Thanks Onlinescuba 866-728-2293
 
Question asked
on 6/14/2021 		do all snorkels use the same size valve for replacement how do you replace the
Answer by chris
on 6/17/2021 		Hi, Thanks for your email. Not all snorkels have the same size valve. You will need to pull the old one out and pull the new one down thru the opening. Thanks Onlinescuba
 
Question asked
on 7/17/2021 		Hello, I am looking for a replacement purge valve for the Cressi Alpha Ultra Dry snorkel. Will this item fit? Thank you, Kevin Cieslicki
Answer by Bill
on 7/18/2021 		Hi Kevin, We are not 100% certain, but it should work. Hope This Helps Happy Diving, Instructor Bill OnlineScuba on Amazon Founded 1996 1 866 728 2293
 
Question asked
on 9/26/2021 		I have a 36 year old Dacor "Turbo Swivel" snorkel with "one-way" vent. The vent consists of a round piece of of rubber like material, about 1/32 or 1/16 of an inch thick and 7/8 inch diameter. A 1/16 inch diameter nib of the same material extends transversely from the center of one side of the flap disc about 1/4 or 5/16 inch and serves to fasten the flap center to a three-spoked hub in the valve body. Do you think the Cressi Silicone Exhaust Valve P26628 replace the failed flap in my otherwise highly functional Dacor snorkel?
Answer by Bill
on 9/30/2021 		Hello, Thanks for your question. So, I am not sure of the specifics other than we sell allot of these and they seem to work for most snorkels. May be worth a shot since they are not that expensive. Hope this helps, Instructor Bill OnlineScuba 1 866 728 2293 Since 1996
 
Question asked
on 8/26/2022 		I have a Sea Quest Side Draft snorkel and the Exhaust value is shot! Is this the correct replacement? Bruce
Answer by amber
on 8/26/2022 		Hi there, Sea Quest snorkels haven't been available for some time so it's rather hard to say for sure if the Cressi silicone exhaust valve would work on that. We do sell a lot of them but the only way to really know is to purchase the item and try it. Otherwise I don't have a definite answer for you. Amber 1 866 728 2293 OnlineScuba Since 1996
 

Share