XS Scuba
Other products by XS Scuba
Reg. Price: $40.00
Our Price: $35.95
on orders of $35.00 or more.
Please review our shipping policies for details and restrictions.


XS Scuba Brass 2nd Stage Quick Disconnect

If you have different Second Stage Regulators for different Rig Configurations and they are not always attached to your Low Pressure Hose, you might want to install a Quick-Disconnect (QD) fitting so you won't need to use a wrench. When you swap out Second Stage Regulators and are changing them out with a wrench any Repair Technician can tell you if it is not done correctly you can actually De-Tune your Regulator and not even know it!


  • Add a quick disconnect to most regulators or full face mask
  • Installs between low pressure hose and second stage
  • Lock down screw to prevent accidental disconnection
  • Chromed brass construction
  • Low pressure use only - below 200 psi
  • Factory cleaned


Be the first to submit a review on this product!
Review and Rate this Item


Question asked
on 8/29/2015
I assume from the picture it is both male and female? Also I have a full face oceanreef neptune with its QD, want my regs to all be QD will this interchange with the oceanreef QD??
Answer by Bill
on 9/2/2015
Here is my answer from XS Scuba: I am not sure about the answer to his question. I not sure about every fitting used in the scuba industry. He needs to find out if the male fitting on his FF mask is a std firing. If it is, then our QD assembly should fit fine. If it is something unusual or different, then I don’t think ours will work. I don’t know the part # of the item. You should be able to figure out if it contains both parts like the AC990 and AC992. Hope this helps, Thanks, Instructor Bill


Join The OnlineScuba Club!

Enter your email address below to subscribe to The OnlineScuba Club.