XS Scuba 3 Gauge Navigator Console
The XS Scuba Navigation Console packs a pressure gauge, depth gauge and a compass module into a great ergonomically design console. Pressure gauge is a highly accurate bourdon tube design, reads pressure from 0 to 5,000 psi and features a built-in thermometer for temperature readings. Gauge has red highlighted readings from 0 to 500 psi for safety reserve air. Thermometer needle is brightly colored for ease of reading.
Pressure gauge comes with a 36" (91.4cm) high pressure hose with 7/16" threaded end. The depth gauge is an air-filled steel diaphragm depth gauge with a 0' to 200' readout and maximum depth indicator needle (MDIN). The MDIN is pushed by the gauge depth needle until the diver meets their maximum depth. The MDNI will remain at the maximum depth reached for the duration of the dive to indicate the diver's deepest depth reached during the dive.
This feature allows the diver to not record that depth while diving yet will be available upon surfacing for later calculations for repetitive dives. The colored graphics of the gauge face allow quick glance monitoring with bright red depth indicators at strategic positions on the gauge face. The red indicators are at depths beyond the standard sport limits of 130' to 200', warning the diver of the excessive depth. The highly accurate compass is calibrated for the northern hemisphere.
FEATURES
- Front Side:
- Depth gauge (p/n GP02)
- 200 ft maximum or 60 m maximum
- Air filled, steel diaphragm construction
- Maximum depth indicator needle
- Luminescent gauge face
- SuperTilt Compass (p/n GP03)
- Back Side:
- Submersible pressure gauge (p/n GP01)
- 0 to 5000 psi (0 to 420 bar)
- Highly accurate, Bourdon Tube design
- Built-in thermometer (ºF/ºC)
- Luminescent gauge face
- Attachment clip ready
- Includes 36 in (91.5 cm) rubber hose