XS Scuba Thermo PVD One-Piece Manifold 3300 psiPhysical Vapor Deposition
The same type of long lasting finish you will find on expensive faucets, high-end door lock sets and premium watches.
Not only a beautiful finish, but also extremely durable.
The finished brass parts are chromed as usual, but before assembly, the parts receive a final PVD finishing process.
The parts are placed in a vaccum chamber where a high power electric arc is discharged at the source material blasting away some into a highly ionized vapor which is deposited on the parts.
Our black-colored PVD finish is accomplished with the use of Titanium Nitride. It provides the following advantages:
ON/OFF SEAT ASSEMBLY
- Significantly harder exterior finish of 2500 HV
- Coating thickness of 0.2 to 0.3 micrometer
- Incredible resistance to salt water corrosion
- Increased scratch resistance
- Very cool "tech look"
Machined with high tensile brass alloy
Nylon high pressure seat material
Teflon plated for years of smooth operation.BRASS STEM
Precision machined from high tensile brass.
Chrome plated for years of corrosion-free serviceSEALED BONNET
Copper crush washer seal.
11/16" hex socket head.ONE PIECE SAFETY
Protected within body to guard against damage during transport.CENTER TO CENTER
Correct spacing for Highland SB725, SB800, SB803 Bands. GAS SERVICE
Clean for pre-blended Nitrox up to 40% oxygen
Viton and EPDM o-rings.
Christo-Lube MCG 111 lubrication
Nylon high pressure seat materialHIGH FLOW
Unsurpassed gas flow
Allows optimum regulator performance
Direct placement portingPVD FINISH
Physical Vapor DepositionPRO OUTLET
Combination DIN/yoke outlet
Removable spin-out DIN insert
Attachment of DIN or yoke style regulator3/4"-1/4 INLET THREAD
3/4"x 14 NPSM threads
Standard for nearly all DOT aluminum scuba cylinders
Standarde for all DOT modern steel scuba cylindersHEX WRENCH TIGHTEN DIP TUBES
Threaded chromed brass dip tubes
No need to use pliers
No more damage to chrome plating
Use a 5/32" hex wrench to install dip tubes