Luxfer Limited 106 Cylinder with DIN valve
This is a Luxfer 4350 PSI Air Tank Wrapped Aluminum 105 Cubic Foot
(no free shipping on this one)
This is a special cylinder manufactured by Luxfer. It is a composite cylinder manufactured of both aluminum and fiberglass. It starts out as a standard scuba 80 cu ft cylinder. Hoop-wrapped fiberglass and resin is added to strengthen the side walls. This allows for an increased service pressure to 4350 psi and a capacity of 106 cubic feet. This cylinder falls under DOT Special Permit 12479. Requirements of SP12479 is a hydro re-test each three years and a fifteen year service life. The inlet to this cylinder is unlike most other scuba cylinders, utilizing 7/8" x 14 UNF threads (a smaller hole). The choice of valves is restricted to a 300 bar DIN valve with the correct 7/8" x 14 UNF threads.
INLET THREADS FEATURES
- 7/8" - 14 UNF, Small hole
- Requires a dedicated 300 bar DIN valve
- Attachment of DIN first stages only
HIGH PRESSURE FEATURES
- 4350 psi service pressure
HIGH VOLUME FEATURES
SERVICE LIFE INSTRUCTIONS
- Hydro retest every three years
- Remove from service at fifteen years
4350 psi COMPATIBILITY FEATURES
- Check with the manufacturer of your regulator & pressure gauge to ensure they are compatible with 4350 psi
CANADA INFORMATION
AIR SERVICE ONLY