Other products by Ikelite
SKU: IKE4403
Reg. Price: $125.00
Our Price: $124.95
on orders of $35.00 or more.
Please review our shipping policies for details and restrictions.


Ikelite Optical Slave Converter for Fiber Optic / Remote Slave Trigger

Trigger your Ikelite DS-series strobe off any camera or strobe flash.

The Optical Slave Converter simply attaches to the strobe's electrical bulkhead in place of a sync cord connector. The enlarged slave window provides approximately 90 degrees field of view for remote triggering. Or thread on the included fiber optic port for the attachment of and triggering via a fiber optic cord. The Optical Slave Converter can be extended using the optional 3-foot Extension Cord for creative backlighting in wrecks, caves, and pool studio set-ups.

It can also be used above water for studio photography work. The Optical Slave Converter supports manual exposure modes as set on the attached DS strobe. TTL exposure mode is not supported. The Optical Slave Converter automatically configures itself for compatibility with both pre-flash and non pre-flash camera modes. No setting of small switches or confusion over number of pre-flashes. Simply turn on your strobe and take one picture to configure.

Compatible With:

  • Ikelite 4501 Fiber Optic Coiled Cord
  • INON Optical D Cable "Non-wireless type" L-Connector
  • Sea&Sea Fiber Optic Cable (L-type) Product No. 50107
  • Olympus UW Fiber Optic Cable PTCB-E02
  • Nauticam Optical Fiber Cable No. 26211 Nauticam to INON
  • Nauticam Optical Fiber Cable No. 26212 Nauticam to Sea&Sea


Be the first to submit a review on this product!
Review and Rate this Item


No questions have been asked.


Email A Friend

Send your friend a link to this product.