IST Alpha J-1000 BCD Jacket, Flagship Diaphragm, Non-Adjustable Octo & Pressure & Depthe Gauge W/Compass
The new IST flagship buoyancy compensator device– Alpha – is a do-it-all, top of the line BCD like no other. It was designed to provide the best in buoyancy control, comfort, stability and style. IST has achieved these fundamental objectives by introducing the Personal Harness System (PHS). Unlike a traditional jacket style BCD, PHS functions independently from the air-cell and it can be adjusted to bring a personal fitting that only custom-made gear can compare. Stability on or below the surface is further enhanced by the tank stabilizing plate and cam strap, which prevent unwanted tank roll. This has to be a part of the essential equipment any serious diver should have.
Advanced features include:
Superior 840D nylon shell
Advanced Ballast Removal System II (ABRS II) takes up to 4kg (8.8lb) of weight on each side
Cold water capable power inflator with pull dump
2 additional rear quick air dump valves
Adjustable sternum strap
Stainless steel D-rings
2 conveniently placed snaps with quick release buckles for easy equipment attachment
2 strategically placed rear trim pockets take up to 1kg (2.2lb) of weight each
2 well proportioned side pockets
Additional cummerbund mesh pocket
IST New Flagship Diaphragm Regulator R860
This latest regulator set from IST is not only feature-packed and capable of handling a high work load, it can also be used in both warm and cold water conditions.
R8 BALANCED DIAPHRAGM 1st STAGE
It has a high-flow, fast-acting valve system that is capable of delivering large amount of breathing gas in an instant, irrespective breathing demand, cylinder pressure or depth. It has not only passed the stringent CE test but the performance is comparable with the best available.
4 intermediate pressure ports (located in the swivel turret) and 2 high pressure ports.
Available with YOKE or 300BAR DIN (G5/8) connector.
Anti-freeze models are available Separately.
Inter. pressure setting @ 9.5~10.0 bar (137~145psi)
Ventilation rate @ 206 bar (3000psi): 3820L / min. (135 cu ft / min.)
O60 BALANCED 2nd STAGE
The O60 second stage is equipped with a metal balancing tube and an adjustment knob. They are able to meet heavy breathing demand with ease and in extremely cold water they also act as heat sink to prevent icing.
Ease of breathing is achieved by a purposely shaped housing interior, which is designed to create a pressure drop in the area just before the mouthpiece. This means air gets pulled towards the diver’s mouth directly after leaving the valve.
The volume of air leaving the valve can be fine-tuned by the adjustment knob on the side of the O60 at any time so the diver can choose to to breathe conservatively, or to open the valve up for more air in physical demanding situations.
The pre-dive / dive switch next to the adjustment knob prevents the valve from freeflowing while on the surface.
The second stage comes with our high-spec, large bore intermediate pressure hose (max. service pressure @ 34.5 BAR / 500psi) which flows sufficient breathing air even when the demand is heavy.
Cracking pressure setting @ 0.8 ~ 1.2 inch of water
Flow rate @ 206 bar (3000psi): 30+ cu ft / min
Max service intermediate pressure @ 10 bar (145psi)
IST Non-adjustable Octopus Scuba Diving Regulator
The IST non adjustable octo is perfect for that back up air when you need it. A much safer option than "buddy breathing" in an emergency. Light weight and easily stowed for when you need it. A good low-cost option for both entry level and experienced scuba divers.
Light weight, pneumatically balanced design
Light purging action
Neutrally buoyant, less jaw fatigue
Comes with high quality 90cm (36in) LP hose
IST Three Gauge Console W/ Thermometer
- Precision 3 gauge console – nanometre, depth gauge and compass.
- Compass with bezel and side window for easy reading in all positions.
- Maximum depth rating: 70m (229ft).
- Maximum service pressure @ 350bar (5075psi).
- Glow in the dark luminescent gauge face.
- Durable boot with convenient attachment loop.
- CE approved.